Question for the group. I recently put on some new Cooper Discoverer Rugged Trek 295/60/R20's and went into Forscan to make the adjustments. I used the easy way instead of "As Built" due to my inexperience.
Original Tire Cir, mm = 2547 "275/60/R20"
New Tire Cir, mm = 2708 "295/60/R20"
I've noticed I'm running 3mph over and thought I'd see if I should switch to a smaller size circumference or if the "As built" way would be more accurate.
What are your thoughts and/or...
295/60/R20 Forscan Recalibrate
Original Tire Cir, mm = 2547 "275/60/R20"
New Tire Cir, mm = 2708 "295/60/R20"
I've noticed I'm running 3mph over and thought I'd see if I should switch to a smaller size circumference or if the "As built" way would be more accurate.
What are your thoughts and/or...
295/60/R20 Forscan Recalibrate